View Full Version : Lee 50 Caliber Mould
Anyone using this boolet in there in-line rifle?? Thanks
mazo kid
08-13-2007, 03:27 PM
I don't have an inline rifle, but I would think it might be a bit too large as it runs about .514 if I remember right. Emery
Have used the Lee R.E.A.L. in .50 and .54 to great effect. You do have to hammer the thing in at first, but when the rifling engraves, it's a breeze. I used to use the "Wonder Lube" / "Bore Butter" stuff without complaint, but when I go out to warm it up next, I'm going to use a less viscous lube. Thinking accuracy may improve when the temps drop out from under.
mooman76
08-13-2007, 10:20 PM
I have tried several of the Lee 50's in my in-line but didn't have much luck. I din't really go all out though.
windwalker
08-17-2007, 06:58 AM
Anyone using this boolet in there in-line rifle?? Thanks
moon why dont you try this one the lee s&w 500 mould it is .501 and would fit the bore of your inline better just use an over the powder wad.
bernie:)
http://i6.photobucket.com/albums/y236/windwalker_au/C501440rf.gif
C501440rf.gif
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.