Glock 26

[tomme boy]

Anyone reload lead for this pistol? What does it like? I want to get the old lady to get more comfortable shooting it. I have about 600 factory FMJ's but I don't want to shoot them up. I bought a Lee 6 cavity 356-120tc mold today for $25 with handles at a local dealer. I need to slug the barrel yet. I casted a few boolits tonite with it and they are dropping at 0.358" I also need to get a sizing die yet for the LAM II

[Love Life]

RCBS 115 gr RN lubed with speed green sized to .357.
RCBS 125-RN-GC lubed with Lotak Hard, aluminum check, sized .357.

[Lloyd Smale]

ive used the 115 rcbs rn, 121rcbs rn and even the group buy 120 rf in mine when i had it and typical of a glock it ran about everything. Only differnce between it and my bigger glocks is it took a bit stiffer load to get a 100 percent reliability with it. Probably due to the stiffer spring that they use in it with that short slide.

[Combat Diver]

Don't have a G26 but its bigger brother G19, I use 115gr FMJ/JHPs under Unique for 1050 fps.


CD

[EMC45]

I would run that very bullet as fat as you could (.358) and medium powder levels and you should be good.