RCBS moulds

[Redhawk]

Anyone using RCBS mould #82305 (38 - 158) or Mould # 82307 (44 - 200).
Would like to know the COA when seated at crimp grouve using 357 M and 44 M brass.
I e-mailed RCBS but they are unable to give me any COA.
Any info appreciated:
George

[Dragoon]

RCBS, or nobody else can tell you that cause we don't know how long your brass is. Maybe they will tell you what the length is from the nose of the bullet to the crimp groove and you can figure it yourself.

[Redhawk]

Ahh. Thats it Dragoon :
Lyman was able to give me a reply using their CAS bullets. Only prob is their 44 M is a 240 gr. - a little more than I want to push.
I assume they used the brass lengths given in their Reload Books.