Brass holder

[jeepyj]

Just thought I'd share a experiment I tried last night. After fumbling with some 9mm brass I decided to hit the wood shop for a idea to aid in to brass control area. I put a couple hundred through I seem to be pretty slick. I really don't know if something similar is available in the market but if so I think it is more fun to build something's myself
62524

[Errokk]

That's a pretty slick idea! I'm gonna have to build me one.

[deces]

Mighty fine.

[rking22]

Hey ,I like that! Thats just what I need for the little 380s that keep getting away from me. Real nice work.

[nhrifle]

PETCO is going to be awful mad when they see you have pirated their idea for the automatic dog feeder! Nice work though!

[jeepyj]

I thought I seen the dog sniffing around pretty hard. Now I know why!that way good for a laugh his morning Ty

[millsa2]

Great Idea. I will have to try that.

[Rusty Goose]

Nice! A reloading room should incorporate found/manufactured tools to personalize it. Anyone can just go buy all the neat gizmos (notice I said "buy" not "afford").

[2thepoint]

That is a great idea....keeps refilling to a minimum. I may have to build one to keep from getting grief for borrowing my wife's tupperware.

[Jim Flinchbaugh]

My first thought was dog feed,
my 2nd thought was single staging 9mm? your a glutton for punishment aren't you? :razz:

[repawn]

My first thought was dog feed,
my 2nd thought was single staging 9mm? your a glutton for punishment aren't you? :razz:

I single stage 9mm - there actually be something wrong with me - i will only do about 200 at a time though - i also measure about every 5 to 10 pulls with a lee balance.

I have been using an old ice cream pale - I will have to make something up like this though I could mount it off the bench freeing up some room.. Thanks for sharing - very cool!

[jeepyj]

Single stage? I guess I didn't know there was any other way. We way up here don't see that fancy stuff to make life easier. ;)

[W.R.Buchanan]

What you built is nice.

They do the exact same thing to hold shotshell hulls and wads for loading them. Usually you'll have two hoppers and pick a hull from one and put it into the machine and then a wad from the other and go back and forth. Lots of guys use dog food dispensers but nice wooden ones are better.

It is a good solution for the problem of keeping empties from cluttering the area.

Randy

[Gunslinger1911]

Oh, now that is slicker than whale snot on an ice flow !!!

Gives me something to do with scraps from other projects - thanks !!!

[red442joe]

I do 9 on a turret on a stand I built. This is the answer to chasin boolits around the stand and diggin brass outta the bowl. They can be mounted right on the stand!

Joe