LeadRecycler
02-24-2013, 10:55 PM
I seem to have lost my notebook of reloading notes when I moved, and I know I've done this before, but I need to work up a load for these boolits. The mold is a Lee 356-102-1R. The boolits I have cast weigh in around 106 gr. I have checked every manual in my library, and cannot find a load.
Based on all the data I have available (from sources I trust), I have determined that the "safe" range for this round is 2.5 - 2.8 grains of Titegroup. The COL is .976", based on the dummy round I have.
This data jives with the marks on my powder dispenser, which was used for 2.7 gr. I just want to double check these numbers, because the last thing I want is to have a gun blow up in mine (or worse yet, my wife's) face.
Based on all the data I have available (from sources I trust), I have determined that the "safe" range for this round is 2.5 - 2.8 grains of Titegroup. The COL is .976", based on the dummy round I have.
This data jives with the marks on my powder dispenser, which was used for 2.7 gr. I just want to double check these numbers, because the last thing I want is to have a gun blow up in mine (or worse yet, my wife's) face.