10mm and 175 swc / 180 tc boolits

[ROCKET]

Unique, Blue dot , 231 or #9 for the 10mm ? Shooting out of my 1911.

[Hounddog]

I love blue dot and #9 in the 10mm. Can't go wrong with either. #9 will meter much better through most powder measures and seems to give higher fps should you decide to go off the reservation and load up some nuclear loads. I keep my loads within the realms of published book loads and have had great accuracy with both. Tightest groups I have ever shot with my own reloads were in my glock with blue dot and a 145 grain lead swc. One ragged hole at 50 feet put a big grin on my face. The 10mm is a fun round to load for. Love being able to load up or down depending on my mood.

Hounddog

[Lloyd Smale]

I use mostly wc820 for the 10mm which is the same as aa9. 12 grains of it with a 180 makes a good load for my glock.

[10mmShooter]

AA#7 for full-house jacketed loads at 1200fps........WW231 for cast lead plinkers at 900-1000fps

[Oreo]

You guys should check out the two new 40cal boolit designs I'm working on in the GB discussion forum. If there's enough interest I'll get Miha to do a run in brass, of course.

[ROCKET]

Any other recipes ?