View Full Version : RCBS mold-is this a Keith type copy ?
BACKTOSHOOTING
02-22-2013, 12:19 AM
82305
BULLET MOULD .38-158-CM 633
I have this mold that i shoot from my 357 lever rifle and it shoots quite accuratley and would like to know if its a keiths type design.
Thanks Steve
BCall
02-22-2013, 12:32 AM
No, the cowboy mold if a RF design, not a Keith, not even a SWC.
stubshaft
02-22-2013, 12:41 AM
NO.not a Keith, but if it shoots accurately what does it matter?
BACKTOSHOOTING
02-22-2013, 01:25 AM
NO.not a Keith, but if it shoots accurately what does it matter?
Peace of mind, I have read that the kieths are a very accurate design and if the RCBS shoots good the Kieths should be great
Piedmont
02-22-2013, 03:37 AM
What you have will likely work better in a lever action because you don't have the front shoulder hanging up during feeding.
220swiftfn
02-22-2013, 04:18 AM
The RCBS molds that would be termed as "Kieth Style" would be the 38-150-swc or the older 38-150-KT
Dan
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.