Lighter Ohaus Style 45 AR Boolit?

[Michael J. Spangler]

does anyone make one?

i like the ohaus boolit, but i think it would really shine a little lighter, maybe 255 grain. I know it's designed to leave a ton of case capacity to allow for maximum use of the 45 AR case. Or is there a similar design boolit with minimal base inside the actual case? I have shot some Ohaus and they're pretty damn fun, i think it would rock a little lighter though

thanks guys!

[GLL]

You might contact 45 2.1 and see if he will design one for you.

Here are his 45 Ohaus bullet and the 454423 he designed for my old LEE Group Buy.
Both are fine in 45AR.

http://www.fototime.com/117515588AC9FF7/medium800.jpg

http://www.fototime.com/E67AE6D4AE83C64/standard.jpg

http://www.fototime.com/52F74072195ED6D/standard.jpg

http://www.fototime.com/ADDA6EB40A70DF3/standard.jpg

Jerry

[45 2.1]

does anyone make one?

i like the ohaus boolit, but i think it would really shine a little lighter, maybe 255 grain. I know it's designed to leave a ton of case capacity to allow for maximum use of the 45 AR case. Or is there a similar design boolit with minimal base inside the actual case? I have shot some Ohaus and they're pretty damn fun, i think it would rock a little lighter though

thanks guys!

I think MiHec could issue this with a hollow base to reduce weight to around 255 gr. You do know there is a current GB going on with hollow points that would get the weight down some also?

[Michael J. Spangler]

good idea guys.

what weight would the HP version be?

[GLL]

http://castboolits.gunloads.com/showthread.php?150111-MiHec-4-cavity-brass-45-Ohaus-Cramer-HP&highlight=45+Ohaus

Jerry

[45 2.1]

The large HP weighs about 250 gr. Here is the link: http://castboolits.gunloads.com/showthread.php?150111-MiHec-4-cavity-brass-45-Ohaus-Cramer-HP

[Michael J. Spangler]

Ok so after a little auto rim break I'm back.

Does anyone have pics of the 454423, 454424, and 45 ohaus side by side?
Which one seats the shallowest?

I'm thinking the 454423 original design might be the way to go. I think it's exactly what I want in my AR loads

Does anyone have the specs on this if I wanted to have one made? Thanks guys!

[ddixie884]

Check posts for GLL he has posted some great side by side pics of lots of the group buy molds. Search for, -.45 Catshooter .45 group buy mold-, hope this helps.......

[Michael J. Spangler]

Thank you.
Now I just need to find one of the molds. They're hard to come by huh?

Time for another gb or if I can get the specs ill have a custom made from Tom