Customer Feed Back and Comments

[BT Sniper]

Feel free to post comments on your BTSNIPER experience. Quality, price, delievery time, comunication, instructions, bullet performance, etc.

[fredj338]

I have had my 223/22lr dies now for about 3m. I have done about 600 bullets with little effort using Brian's instructions. It is far more straight forward than I thought & the quality of the dies & access makes it very simple. Yes the kit is not cheap, but then few things made well are. Thx B.
http://img.photobucket.com/albums/v703/fredj338/22lr-223firstgroup_zps54ed688c.jpg (http://smg.photobucket.com/user/fredj338/media/22lr-223firstgroup_zps54ed688c.jpg.html)

[supe47]

I could not be happier with my BT Sniper 22 Cal. dies. Pictures are worth a thousand words.
http://castboolits.gunloads.com/attachment.php?attachmentid=75392&d=1373075005http://castboolits.gunloads.com/attachment.php?attachmentid=77223&d=1374880449http://castboolits.gunloads.com/attachment.php?attachmentid=77222&d=1374880426
'Nuff said.
Supe

[BT Sniper]

Nice shooting! Swage on!

BT

[C.I.D]

I placed my order(s) after close to 18 months of doing my homework... Talking to Mr sniper! off and off shooting samples of bullets from his dies. Other dies.

Looking forward to getting everything in he was very willing to work with me on payment options!

Thank you again sir! Looking forward to spending my xmass derimming 22 brass that whole week!

[BT Sniper]

Your welcome! You will not be disappointed.

Brian

[Dennis Eugene]

Brain, Thanks loads! Guys I waited around 18 months and finaly my set of dies for making .45 cal jacketed from .40 cal spent brass arrived Thursday 1/22/15, I picked them up at the PO after work. Friday was a full day at work so no joy Friday. But by the end of Saturday I had completed 10 jacketed bullets. Thanks to Brian it was easy,tomorrow I'll tweak a few things, trim brass shorter for one and try the notch die for another. By tomorrow afternoon I'll have a couple hunnert jacketed bullets, if not loaded up and ready to shoot at least ready to load up. Shucks I may even send some down rnge by tomorrow afternoon. Thanks again Brian it was a long wait and a pretty good chunk of money but in my opinion well worth the wait and well worth the money. Expect to hear from me again. Dennis Eugene

[C.I.D]

So after much waiting! Talking! So on..... I finally have my BT sniper dies!!!!

[clodhopper]

Just wanted to comment about BTsniper, Great tools, great guy, great service. His core mold is so slick inside it took no breaking in. When I had trouble with some punches, he sent some more. Always good for a visit on the phone.
Thanks Brian.

[SniderBoomer]

I just wanted to make some comments, I live in the UK and recently took delivery of a full-set to allow making 224 from 22 RF brass.

Opening the package, the sense of quality just whacks you in the puss when you open the boxes, big cheesy grin time, these are just made beautifully...

I immediately started making some very nice 224's - such as these...

http://i62.tinypic.com/2jeshn6.jpg

I took a few days away, I suddenly had a lot of stressful things to sort out back home. To cut a long story short, I caused a tech issue that stopped me swaging, and I needed a bit of help.

Brian just gave me the most fantastic, deep-detailed, how-to's that allowed me to fix the problem I had immediately. That was impressive. Now I'm back to swaging some just fantastic bullets again.

That's it. The backup from this man, is SUPERB.

[Bonz]

I now have several of BT Sniper pistol caliber swaging die sets. Yes, they took a long time to get them and they are expensive but they are very high quality and make great bullets. The swaging die set that has paid off the most is the 50 cal. The cost of commercial bullets is about .70 per bullet. To save some money, I started casting my own, made out of lino. I had to remove the compensator on my 4" S&W 500 mag because small pieces of lead were blowing out of the compensator ports. Hated shooting my pistol without the compensator so I switched back to JHP. Now, I have the BT Sniper 50 cal swaging die set and can make great bullets out of pure lead and .45acp brass, huge money savings ! I also save a little on my 44 cal and 45 cal bullets but not so much on my 357 bullets which I buy commercial jackets. I also remember about 2 years ago when I could not buy bullets because of the shortages and hoarders. And with the " full on attack " by the current government on guns, its very nice to be able to make bullets when none can be bought.

[Meatpuppet]

These dies are works of art.

[BT Sniper]

Glad you like them. Thank you for your support and for the feed back.

Good shooting and swage on!

BT

[rcslotcar]

I bought BTSniper 22lr Pneumatic Derim Press ,WoW This is Awesome!!

[BT Sniper]

Glad you like it. I might have to make some more if there is enough interest.

Good shooting and swage on!

Brian

[BlackoutBuilder]

I love the BT Sniper BT simple die set. Got it with the press he modified and automatic ejection system. Buying that was a really good move, the leverage on the press is great for derimming and the ejection system saves so much time. I've made a dozen or so different bullets with it, you just need to use your head.

[grullaguy]

I love my new tools Brian!

I made some bonded core, 200 grain flat points which should shoot great out of my Ruger #1.

Easy to use and just what a tinkerer like myself needs to fill my winter days.

[BT Sniper]

I love my new tools Brian!

I made some bonded core, 200 grain flat points which should shoot great out of my Ruger #1.

Easy to use and just what a tinkerer like myself needs to fill my winter days.

Awesome! I look forward to hearing how they work out for you.

Keep us posted.

Good shooting and swage on.

Brian

[Guns N Glory]

Those .40 one step dies with BTX die are really something else. Thanks again BT.

[BT Sniper]

Yep. I keep telling everyone that if I had my way anyone that shoots 10mm or 40 cal would be shooting bullets made from 9mm brass.

Your welcome!

Swage on!

BT

[DDriller]

The new .40 die works awesome. Thanks Brian
265713

[BT Sniper]

That's what I'm talkin bout!

Your welcome!

Looks good! Swage on!

Brian

[SSG_Reloader]

288992I've got several calibers on order with Brian and when he shipped my .224 last week , he had a 40 cal immediately available. Although I don't shoot a 40, my brother does so I ended up grabbing one from him. Looks like I'll end up getting a 40 now...

Only made about 10 so far but they came out perfection!

[BT Sniper]

Swage on! Looks perfect.

BT

[Metroxfi]

296721
Had a chance to mess around with a BTX and 40sw to 45 jacket expander. Full length 40sw cases, annealed, and some 40sw bullets from my reject bucket made a small handful of beautiful bullets. These were formed in a corbin 3/4E .452 point forming die. The biggest surprise came when I weighed them, 250.1gr, 250.8gr, and 251.2gr not too bad for testing with some scrap! Felt really good to make something in that die besides reforming powder coated bullets!

[Jon20102009]

I'm loving this 40cal die from Brian went to the range a couple days ago working up a 40 load and I'm very impressed on how accurate these bullets are even ran flawless through my 40 s&w carbine hitting steel at 200 yards repeatedly would highly recommend to anyone that does any amount of shooting this pic is a 10 shot group where the big hole is from about 15 feet away from a M&P 40 compact

[Jon20102009]

Anyone having issues getting ahold of Brian? Haven't heard anything from him since the beginning of January emails sent and voicemails left still no reply

[BT Sniper]

I'm still here, limited time for communications and limited time in shop with the second job I have had to take.

I am in shop now working on all back orders.

Brian