View Full Version : Boss II & HRN LNL
Tamitch
02-09-2013, 10:34 PM
Will the Redding Boss II except the Hornady LNL adapter?
doulos
02-09-2013, 11:01 PM
It should. You have to remove the 7/8 -14 thread bushing and install a Hornady lock n load conversion bushing. The hole with the bushing removed is 1 1/4 12 thread and thats the thread used on the Hornady conversion bushing. It should work on most presses. I know it works on my RCBS Rock Chucker and I have a Big Boss 2 on the way right now. Should be here Monday. Ive actually seen pictures of them on the internet using Hornady bushings. Should be no problem.
check this
http://www.sinclairintl.com/reloading-equipment/reloading-presses/single-stage-turret-presses/big-boss-ii-reloading-press-prod38154.aspx
and this
http://www.hornady.com/store/Lock-N-Load-Conversion-Kit/
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.