7mm-08 bushing

[cdet69]

I need a neck sizing bushing for my Redding die in 7mm-08. Was wondering what size bushing other people are using.

[runfiverun]

you determine that by the thickness of your brass and how much neck tension you want.
if you want 282 inside diameter.
you need to know the thickness of the brass say it's .012 so you double that.
.024 and add the .282 making 306 for the bushing.
get one on either side of that number to adjust for springback, different brass thicknesses,and different neck tension amounts.

[cdet69]

Thanks for the help runfiverun.

[Olevern]

'course you will need a ball mike to determine the thickness of your brass.