Need loads for 130 gr cast 7mm tcu

[Bigbang2]

ordered a lee 7mm 130 grn mold to cast some plinkers . What I need is some load data for this round. Some I need for gas check loads and some for low vel non gas checked loads. Any help would be appreciated. Cant seem to find any load data in any manuals for the 130 grain cast..
Thanks

[Nobade]

15.0gr. IMR4227 works well in mine for an accurate midrange level load.

All the AA2230-C that fits in the case really boots them out there fast.

[x101airborne]

I was using 10.0 grains 2400 for a mid range load with the 130 soup can. Shot about as well as I could hold and it did not disappoint when pitted against sunning turtles at medium to long range. I did notice a little position sensitivity, but it could have been me. My 'tender broke before I shot more than a couple hundred or so.