View Full Version : need a little help
hutch18414
02-02-2013, 04:27 PM
I have been using 230gr 45 acp boolits from Missouri Bullets over 5.8 grains of Unique. I would like to switch up and use some AA#2. Can anybody give me some load info. Don't really need anything super hot,just a good target load.
runfiverun
02-02-2013, 05:16 PM
5.5-6.1
hutch18414
02-02-2013, 09:09 PM
Thanks, I'll load some up tomorrow and try them out. I have ordered a Lee six bullet mold but it was back ordered.Can't wait to start casting. I just wish I had started on this about six weeks earlier.
williamwaco
02-02-2013, 11:28 PM
5.5-6.1
+1.
You will really like the No.2
runfiverun
02-02-2013, 11:58 PM
had a hard time giving the load as i settled on @ 6 grs [okay 5.8] of unique a while back.
after going through trying a bunch of the faster powders.
hutch18414
02-03-2013, 12:33 AM
I only have 2+ lbs of Unique left and got a really good deal on 4 lbs of the #2 from a friend. The way almost everything is vanishing from the shelves I couldn't pass it up. I was shooting 2-300 rnds a week,have cut back to 100. But 5.8 gr of Unique is where my 1911 has the best accuracy. I hope I can get something similar with the #2.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.