need a little help

[hutch18414]

I have been using 230gr 45 acp boolits from Missouri Bullets over 5.8 grains of Unique. I would like to switch up and use some AA#2. Can anybody give me some load info. Don't really need anything super hot,just a good target load.

[runfiverun]

5.5-6.1

[hutch18414]

Thanks, I'll load some up tomorrow and try them out. I have ordered a Lee six bullet mold but it was back ordered.Can't wait to start casting. I just wish I had started on this about six weeks earlier.

[williamwaco]

5.5-6.1


+1.

You will really like the No.2

[runfiverun]

had a hard time giving the load as i settled on @ 6 grs [okay 5.8] of unique a while back.
after going through trying a bunch of the faster powders.

[hutch18414]

I only have 2+ lbs of Unique left and got a really good deal on 4 lbs of the #2 from a friend. The way almost everything is vanishing from the shelves I couldn't pass it up. I was shooting 2-300 rnds a week,have cut back to 100. But 5.8 gr of Unique is where my 1911 has the best accuracy. I hope I can get something similar with the #2.