One mold for 3 guns

[Bo1]

My first attempt at casting boolits will be 44spcl, 44mag, and 444 Marlin lever action.
Can I purchase one mold around 250gr. that would work in all three
guns? I am thinking that it would have to drop at .430, or maybe even .431.
Am I correct in this thinking, or do I need to be set straight?
After being on here for a couple of weeks, I think that a RNFP boolit would work
OK for hunting, defense, and plinking. Would also like a decent quality mold with conventional
grooves. Any suggestions are welcome.

Thanks,
Bo

[Blammer]

get a 250gr Ranch Dog Style 44 cal that drops at about .433.

that is what I would recommend.

The RD (ranch dog) mould has a nose designed for the 444 and leverguns, and it will also work well in 44mag.

(I have one. :) )

NOE has some for sale, if they are in stock

noebulletmolds.com

here it is and he has one! I 'd get it, a quality mould that will work great for you!

http://noebulletmolds.com/orders/catalog/product_info.php?cPath=37&products_id=217

[runfiverun]

that's probably the best you are gonna do.
the 444 might want something in the 432-33 range,so you'll either have to make them fit the biggest diameter and hope they fit the others.
or buy separate sizing dies.