Lee Hand Press ram dimensions

[FLHTC]

does anyone have the Lee Hand Press that could take some measurements for me? Im doing a retro fit on an old press with a ram that accepts universal shell holders and need to know the diameter and rough length of the ram on the Lee. Im assuming that all their single stage presses have a ram cut from the same diameter cold rolled stock so anybody that could supply a diameter, please chime in.

[dlamp]

.812 od 5.6875 oal it looks to be 5.375 from center of shellhead holder to center of pin

[FLHTC]

Thank you sir. Now to place an order with Lee Precision for the ram. It is just what im looking for.

[gwpercle]

Which press are you retro- fitting ? This could be usefull information for those presses .
Gary

[FLHTC]

Its an old Pacific that has a ram with the dedicated shell holder for the 06', 270, 280, etc.
I want to swap out the ram with one for universal shell holders. There are several that will work but none can be found to be cost effective. I need to be in it for less than $10 or its not worth it.

[EeyoreXDM45]

Its an old Pacific that has a ram with the dedicated shell holder for the 06', 270, 280, etc.
I want to swap out the ram with one for universal shell holders. There are several that will work but none can be found to be cost effective. I need to be in it for less than $10 or its not worth it.

I was looking into the same idea. How did it work and did you have to do any modification or did it work out of the box?

[FLHTC]

Haven't done it yet. Those darn hand presses are bringing too much to invest in one. Im not in any hurry but it will work with some modification.

[EeyoreXDM45]

ok was just wondering because I found just the ram for sale and was wondering how it turned out for you.

https://fsreloading.com/search.php?mode=search&page=1&keep_https=yes