PDA

View Full Version : How to tell?



GhostRider32
01-21-2013, 01:24 PM
Hi guys, new here and have read a lot but still have some questions. I called a salvage yard and they said they had some lead and some linotype. How so I tell by simply looking? Will the lino have markings on it?

I'll Make Mine
01-22-2013, 08:30 AM
The scrap yard probably knows which is which, but linotype is much harder than pure or wheel weights; you can pretty readily compare the effort needed to scratch one or the other with a scriber or small screwdriver tip.

badbob454
01-22-2013, 09:58 AM
you cant scratch lino with your thumbnail , least i cant . it will ring where pure and is easily scratched lead is a dull thud ... test it before you add to your stash ..

GhostRider32
01-22-2013, 10:06 AM
Thanks.

Baryngyl
01-22-2013, 07:22 PM
Take a piece of each and scratch them against each other, the lead will be scratched by the linotype much easier than the other way around.


Michael Grace

williamwaco
01-22-2013, 08:41 PM
Most scrap linotype I have seen is still in the form of "lines of type".

you will recognize immediately as type.

If it has been melted down refer to the above comments.