Quick question for the K31 guys on here.

[Ole]

Which scope mounting system should I buy?

http://www.brownells.com/optics-mounting/scope-bases/rifle-bases/aluminum-k31-clamp-on-mount-sku100000725-1666-6109.aspx?ttver=1&mc_id=80000&srch=1&gdftrk=gdfV21820_a_7c187_a_7c3466_a_7c100000725_d_ 100000725_d_10255

The Aluminum one for $64.99 or the Steel one for $115.85, or something not listed?

Thanks! :mrgreen:

[ukrifleman]

I can recommend the Swiss products aluminium mount, it is a quality piece of kit that is simple to fit or remove, being held on by just one allen screw.
The Swiss Products mount on my K31 is rock solid in use and has never worked loose, even with GP11 military ball.
ukrifleman.

[leadman]

I have the B-Square mount that replaces the rear sight on mine. I had Jim inPhx mill the top surface down as it made the scope set way too high. Graf & Sons also carry alot of products for these rifles.

[MtGun44]

Swiss Products is fine quality, works great, no problems ever. I have several friends that
also have them, and are very pleased. I have both aluminum and steel, seem to both work
great.

Bill

[madsenshooter]

I got one of the aluminum ones from ebay when John Zhu (aka accumounts) first started selling them. Wouldn't recommend it. I had to put windage adjustable rings on the mount to get the scope close to parallel with the bore. Before putting the windage adjustable rings on, there wasn't enough windage adjustment in the scope to get on target at 100yds.

[STP22]

I got the steel mount and put a set of dovetail-Weaver adapters on and mounted a Leupuld 10X scope in low Burris Signature rings. Couldn`t be happier with it.

Regards,

Scott

[1Shirt]

STP22, how about a pic or two.
1Shirt!

[STP22]

Not on dial-up service from my PC.

I can however, send pics from my iPhone to another...but it`s a bit much to ask for I`m sure.

Regards,

Scott