dillon super swage

[phil3333]

i found a neat gadget for my super swage,its a little clip you insert in place of the case height adjustment
thing,it centers the case so no more nipped edges on your primer pocket

[rodsvet]

Where do you get one? Rod

[phil3333]

on ebay a place called inline fabrications

[rodsvet]

Thank you Phil, I will look them up. Rod

[VHoward]

http://www.inlinefabrication.com/Dillon_Precision.html
I bought the roller handle adapter for the Square Deal B from him. Good guy to do business with.

[phil3333]

if anyone has his handle upgrade for the 650 i would like your feedback,thinking of buying

[David2011]

Phil,

Just do it! I put the Dillon aluminum roller handles on my 550 and 650- worth every cent! It's, IMO, easier to apply force and there are no blisters even after 1000+ rounds. I also think it's less tiring to run the presses with the roller handle. My bench is 42" tall, determined by how far I could reach down without flexing my lower back signifcantly. The Inline Fabrication handles look like they wold make it even better.

David

[David2011]

i found a neat gadget for my super swage,its a little clip you insert in place of the case height adjustment
thing,it centers the case so no more nipped edges on your primer pocket

Those look pretty useful. A few years ago, after trashing a number of 5.56 primer pockets, I made an insert that does the same thing. I mixed up some slow cure epoxy and stirred in some black pigment. The epoxy was put in a piece of polypropylene bag (plastic shopping bag) and placed in the Super Swage. A second piece of the plastic bag was put on top of the epoxy. I put a cartridge in the swage and raised the lever to fix the cartridge in place. It hardened overnight and was removed the next day. I cleaned it up around the edges and have used it ever since. It centers the cartridges and speeds swaging significantly. Cost: Materials already on hand!

David

[David2011]

132799 132800 132801

David

[DaveInFloweryBranchGA]

if anyone has his handle upgrade for the 650 i would like your feedback,thinking of buying

I have the one for the RCBS Pro 2000 progressive. It is a better roller handle than what Dillon sells in my opinion.