Need help on picking a mold for my two Mosin Nagants

[GMW]

I have two Mosins that their bores measure out to .311 and .313. I would like to cast a bullet in the 200 to 225 range with gas checks. Are there any off the shelf molds out there?

[possom813]

http://www.titanreloading.com/molds/bullet-molds/762-x-39-303-b-8mm/lee-dc-mold-c312-185-1r-

Not quite as heavy as you're looking for, but Titan has that one.

[Artful]

http://noebulletmolds.com
AL has some that he makes from time to time that might do ya.
http://noebulletmolds.com/orders/catalog/images/N.O.E._Bullet_Moulds_314_202Gr._RN.Jpg

has a lighter one that works with 7.62x39 or 7.62x54 in stock I see
http://noebulletmolds.com/orders/catalog/images/N.O.E._Bullet_Moulds_314_155Gr._FN.Jpg

[Calamity Jake]

http://noebulletmolds.com
AL has some that he makes from time to time that might do ya.
http://noebulletmolds.com/orders/catalog/images/N.O.E._Bullet_Moulds_314_202Gr._RN.Jpg

has a lighter one that works with 7.62x39 or 7.62x54 in stock I see
http://noebulletmolds.com/orders/catalog/images/N.O.E._Bullet_Moulds_314_155Gr._FN.Jpg

Yap Als version of 314299 is a good one and it's about 202gr.

[Catshooter]

I use the Lyman/Ideal 311299. Mine, with my wheel weight alloy drops 'em at .315 and their 222 grains lubed and checked.

Welcome to the site.


Cat