molds for 9.3 rifle

[gcox93]

Hello to all,
I am BRAND NEW to casting boolits and in fact I'm still shopping for all of my equipment. A friend and mentor directed me to this sight. One of the rifles I really want to cast for is my 9.3x62. Short of having a custom mold machined Iwas wondering if anyone could point me to a source for a 250grn 9.3 mold.
Thanks,
Greg

[frank505]

NEI has one, #174, a 260 grain cast from linotype, so from ww will be heavier. Or the #175 a 304 grain.

[gcox93]

Do you have a web link for NEI Frank?
Thanks

[Glen]

http://www.neihandtools.com/

I was just shooting some the NEI 304 grain bullets yesterday in my 9.3x57. Very accurate bullet!

[gcox93]

Thanks Glen...I was just pricing a 9.3x57 this morning.

[Bullshop]

Scroll all the way down to the bottom of this page and click on the link for the bull shop. There click the links button and you will find a link to NEI.
BIC/BS

[9.3X62AL]

Welcome to the board, 9.3!

My current mold for the 9.3 x 62 is from Mountain Molds. That firm seems to be inactive at present, the owner is involved in a construction project on his home and shop. Dunno when he will be up and running again.

www.mountainmolds.com

The 9.3 x 62 is a very fine cast boolit caliber.

[Idaho Sharpshooter]

I have a four cavity NEI that casts two each of the 260 and 304gr boolits. Within .001" of round (all four) and capable of sub-2moa at 100/200; lighter one at 2200fps, the heavy at 2050fps. The only caveat is that NEI cuts them for the 35 caliber gascheck. I have heard of people cutting the shank at .269" and using annealed 375 GC's. Mine do not lead at the speeds mentioned, and work well.

Rich
DRSS

[smokemjoe]

CBE in Austrial makes a fine mold. US money about $60.00, Write JIM.CBE@Bigpond.com.au

[mstarling]

I've actually ordered the NEI 174. He is indicating a two week ship time. Been almost two weeks now and he has not yet shipped.

Hope this one works well ... need to feed a bunch of 9,3c62 and 9,3x74R rifles. :)

[verney]

CBE in Austrial makes a fine mold. US money about $60.00, Write JIM.CBE@Bigpond.com.au

CBE has a nice selection of moulds including several 9.3mm. Their catalog can found from:
http://www.castbulletengineering.bigpondhosting.com/