PDA

View Full Version : Forming 357/44 B&D Bain and Davis brass from 44 Mag



ohland
12-28-2012, 11:49 AM
Old man came up from the basement with a formed 357/44 case chambered in the Encore. Other than the Imperial sizing wax on the neck, it looked stock. Details at 6.... The Hornady New Dimension 357/44 dies I got have the older version of the Hornady Zip Spindle that is smooth. From past experience, the smooth versions slip unless you crank down on the collet... a lot... Ordered two of the "ringed" replacements off off fleabay, price per unit was about the same as Natchez, but the shipping for both is about $4.90 ish, beats out $12....

:coffeecom