help with lyman 147gr

[RG_86]

Howdy Boys, I need a bit of help. I am a big fan of the Beretta 92 but problem is the dang barrels tend be freakishly big. Mine slugs out at .3575, My preferred mold lyman 147gr BB 4 cavity drops at .3575, I was wondering if anyone knows of anyone here or anywere for that matter that could do some work on my mold, I would like to have BB removed and maybe have it reamed a bit to about .359. I have not been able to find anyone here in Fairbanks that could do this for me. I am not sure if this is even something that can be done but i figured if I did not ask I would not know. Thanks for the help -Bob

[cbrick]

As a matter of fact there is, a true master at that very thing. He's done several for me and I highly recommend him. See the web site in the link and contact Erik through the web site.

Hollow Point Bullet Mold Service (http://www.hollowpointmold.com/)

Rick

[RG_86]

OUTSTANDING!!! I just sent a email. Thanks a bunch for your help!!

[r6487]

i had one done by eric, without the bevels it went to about 158 grains with WW.