Need load data....

[waco]

Just got an RCBS 45-500 mold, gas checked for my 1895 marlin .45-70
I'm looking for mild to wild loads safe for the marlin.
Anyone have any load data they could share with me?
Thanks in advance!
Waco

[Nobade]

You can go faster, but that boolit seated to work through the Marlin over a lightly compressed load of IMR 4350 is at max SAAMI rated pressure. I know folks load them even hotter, but now you know. Plus that kicks plenty anyhow. For mild, a load of Trailboss to the base of the boolit without compression will kick them out at about 900 fps with very good accuracy.

[waco]

I've got some 4350...
Thanks Nobade

[Just Duke]

What did the bore slug out at just curious?
I have a bunch loaded with the similar profile from an NEI mould and they work great. I'll dig up some data.

[waco]

I haven't slugged it. I size them to .459 and lube with BAC
.459 seems to be what the gun likes

[Just Duke]

I haven't slugged it. I size them to .459 and lube with BAC
.459 seems to be what the gun likes

All my Ballards like that size too. ;)