gunoil
12-19-2012, 02:16 PM
LUBEING BRASS WONT FIX THE PROB I HAD, WOULD ONLY HELP A LIL'.. This set-up now needs no lube..
THIS IS ABOUT EXPANDER JAMMED INTO (on the inside of brass, not outside) BRASS, I DONT WANT LUBE ON INSIDE OF BRASS. THE IDEA OF DIFFERENT BRAND WORKS BUT MY RCBS HAS BELL TAKEN OUT ON LAITHE.
http://i1113.photobucket.com/albums/k511/putt2012/39D19804-266F-49E4-B9AD-A7183D99D417-740-000000B371B0A358.mp4
update:
http://i1113.photobucket.com/albums/k511/putt2012/48D7E51D-7F30-4165-81C4-2EE8F0E57348-740-000002040399EABA.mp4
talking bout expander die only. pulling brass out of Expander die only conversation. everyone should watch darwins youtube " 100 in 6:37 ". This darwin youtube is what got me on this project.
http://i1113.photobucket.com/albums/k511/putt2012/5E7CD15C-EAC9-4756-AD29-CC5B0A915D0B-4490-0000037DEAE696DB.jpg
Tonite i took 9mm out of LLM & set it up for 45acp..
1) sizer ( already have decapped & SS cleaned brass).
2) old 1987 rcbs expander & solid, not a thru die ( I put on laithe and "stepped it like dillon" expander [photo above] thru die supplied by mrbullet).
3) lee pro powder measure (with expander machined off, no bell just turned off on laithe flat). The lil' internal 4$ lee expander was totally cut off. All lee powder measures does is drop powder in station 3.
4) mrbulletfeeder.biz/45acp/cast boolits.
5) Lee seat die with lite crimp.
http://i1113.photobucket.com/albums/k511/putt2012/4EB7B037-8BCB-4BF6-9E74-8CDBD736901A-740-0000006B27065BA2.jpg
i have had rcbs exp die for a while and finally figured out what to do with it watching darwin, mrbullet, & NO LUBE NEEDED WITH THIS SET-UP..
2 VIDEOS BELOW;
http://i1113.photobucket.com/albums/k511/putt2012/4CEE909D-5311-4280-86F1-A1CBD7D191A8-740-0000006B29CDD755.mp4
http://i1113.photobucket.com/albums/k511/putt2012/383B45AB-DB14-4158-8750-22A16B75C836-740-0000006F9137E59D.mp4
THIS IS ABOUT EXPANDER JAMMED INTO (on the inside of brass, not outside) BRASS, I DONT WANT LUBE ON INSIDE OF BRASS. THE IDEA OF DIFFERENT BRAND WORKS BUT MY RCBS HAS BELL TAKEN OUT ON LAITHE.
http://i1113.photobucket.com/albums/k511/putt2012/39D19804-266F-49E4-B9AD-A7183D99D417-740-000000B371B0A358.mp4
update:
http://i1113.photobucket.com/albums/k511/putt2012/48D7E51D-7F30-4165-81C4-2EE8F0E57348-740-000002040399EABA.mp4
talking bout expander die only. pulling brass out of Expander die only conversation. everyone should watch darwins youtube " 100 in 6:37 ". This darwin youtube is what got me on this project.
http://i1113.photobucket.com/albums/k511/putt2012/5E7CD15C-EAC9-4756-AD29-CC5B0A915D0B-4490-0000037DEAE696DB.jpg
Tonite i took 9mm out of LLM & set it up for 45acp..
1) sizer ( already have decapped & SS cleaned brass).
2) old 1987 rcbs expander & solid, not a thru die ( I put on laithe and "stepped it like dillon" expander [photo above] thru die supplied by mrbullet).
3) lee pro powder measure (with expander machined off, no bell just turned off on laithe flat). The lil' internal 4$ lee expander was totally cut off. All lee powder measures does is drop powder in station 3.
4) mrbulletfeeder.biz/45acp/cast boolits.
5) Lee seat die with lite crimp.
http://i1113.photobucket.com/albums/k511/putt2012/4EB7B037-8BCB-4BF6-9E74-8CDBD736901A-740-0000006B27065BA2.jpg
i have had rcbs exp die for a while and finally figured out what to do with it watching darwin, mrbullet, & NO LUBE NEEDED WITH THIS SET-UP..
2 VIDEOS BELOW;
http://i1113.photobucket.com/albums/k511/putt2012/4CEE909D-5311-4280-86F1-A1CBD7D191A8-740-0000006B29CDD755.mp4
http://i1113.photobucket.com/albums/k511/putt2012/383B45AB-DB14-4158-8750-22A16B75C836-740-0000006F9137E59D.mp4