Dthunter
12-17-2012, 11:19 PM
Hi Guys! I just thougt I would share my good time today out shooting Cast Boolets. I posted a couple pictures in the gascheck forum. I tought this forum might be more appropriate.
I used a Remington 700, Varmint Laminate.
I double dipped the boolet noses in Lee liquid allox (twice). This gave the nose a nice even layer of lube to help center the nose in the rifling. My noses show light rifling marks when chambered. Between the lube and correct sized noses (.300), this keeps the noses very well centered for the trip down the bore.
All the other load information is recorded on the pictures. (Use at your own discretion)
The diamond on the lower center of the pictures has a 1/2" white center.
These Loads seem to show some promise. Unfortunately I managed to have a flier in each of the groups. It was a characteristic I showed nearly all day! [smilie=b: LOL! I managed 3 groups under.400" with j word bullets (7mm Mag.) though, so It wasnt a total flop.
56151561525615356154
Hope you guys like the post and pictures.
Take care and Merry Christmas fellow Boolet Shootes!
I used a Remington 700, Varmint Laminate.
I double dipped the boolet noses in Lee liquid allox (twice). This gave the nose a nice even layer of lube to help center the nose in the rifling. My noses show light rifling marks when chambered. Between the lube and correct sized noses (.300), this keeps the noses very well centered for the trip down the bore.
All the other load information is recorded on the pictures. (Use at your own discretion)
The diamond on the lower center of the pictures has a 1/2" white center.
These Loads seem to show some promise. Unfortunately I managed to have a flier in each of the groups. It was a characteristic I showed nearly all day! [smilie=b: LOL! I managed 3 groups under.400" with j word bullets (7mm Mag.) though, so It wasnt a total flop.
56151561525615356154
Hope you guys like the post and pictures.
Take care and Merry Christmas fellow Boolet Shootes!