Casting thermometer.

[koehn,jim]

Just got a Midsouth flyer and they have casting thermometers for 22.50. Its up to 1000degree with a clip. In case anyone needs one.

[Moonman]

Tel Tru the REAL manufacturer has the Model LT225R

2" Dial, 5" Stem, 200-1000 Degrees for $19.95 plus shipping.

[captaint]

I'm thinking TelTru makes all, if not nearly all the thermometers for us casters. Same therm - different prices. Mike

[zuke]

Tel Tru the REAL manufacturer has the Model LT225R

2" Dial, 5" Stem, 200-1000 Degrees for $19.95 plus shipping.

That's where I got mine.

[ErikO]

Here's an oddball question, would the therm that comes as part of a turkey frier package work? Assuming it goes to 800 degrees, that is.

[gunoil]

traded some lead for a lyman.

[kelbro]

My Lyman reads nearly 100 degrees off from the two digitals that I have. It's all relative though. Find the temp that the mold likes and use it. If it say 650 on the Lyman but it's really 750, the mold doesn't care :)

[dickttx]

TruTel is 19.95 + 9.50 shipping.

[BACKTOSHOOTING]

Tel Tru the REAL manufacturer has the Model LT225R

2" Dial, 5" Stem, 200-1000 Degrees for $19.95 plus shipping.

Got mine this week, Works great :p

[prs]

I Purchased one from RotoMetals. Have not noticed the manufacturer, but it runs spot on with my PID probe. I did with out such goodies for many years, but LIFE is good.

Have any of you attached the clip-on to the inner surface of the lift bracket of a Lee Pro 20?

prs

[Pmc]

The kids just ordered me this one for Christmas
2" Bimetal Thermometer: 200~1000F/C (Back) from Howe Gauges on ebay. 12.99 and 8.50 shipping with a 6 inch stem

[ROGER4314]

HMMMM.....I read this a few months too late. I ordered mine from Midway for about $40.

Flash