mrbulletfeeder.biz/drop die only/bulk buy

[gunoil]

mrbulletfeeder.biz/bulk buy for members/drop die only.. I dont work or get money from, but I have some of these dies and they are the best for just a single drop die rite out the box. I have 40,45acp,9mm drop dies from ricks company. Work rite out of the box incredible for some one that has been loading for lil' over a year.

I have talked to rick and he could make some individual drop dies and they would sell to members for 55$ plus shipping. Maybe would could grow a list for these? Please dont tell about other dies.

Iam just tryin to help members who might want great boolit (yes cast boolits) drop dies.




mike@harleykitplane.com

[gunoil]

These dies are great built aluminum and run a (3 ball bearing) cast boolit drop system. A two stage level that is set with pull pin is used for large or smaller boolits of same caliber. I put lanolin (walgreens) on threads since it is aluminum to aluminum. Will protect threads forever.

On the 9mm one i have a lee 4 tube turret setting on top of die.

On 40 cal and 45acp, i have simple pvc tubes from plumbers pipe supply store.

I ran 40's last nite in classic and 9's in LLM.

[jmorris]

From gunoil's description it sounds like they are a lot different than the old ones. I have one for .224 and been thinking about one for .30 cal bullets, they still offer rifle bullet feeders?

[gunoil]

yes sir, rick was workin on some rifle stuff today.

heres a lil video, mr bullet on my classic.
http://i1113.photobucket.com/albums/k511/putt2012/C0F7A090-8E1D-4591-AA0F-7A980503232B-8780-000009AAC1A596FD.mp4

[A pause for the COZ]

55 bucks??? I am in for a 45acp one. Whats the poop? How do I get it?

[ratboy]

i would like to get one for .224 and maybe 30 if he starts offering the rifle sizes.

[gunoil]

as most know a complete mrbulletfeeder.biz is $450.00 or more. The drop die only for $55 would be a great offer for members and like me on lower budget. Rick is processing how to get some more made. We may have to waite 40 to 50 days, Anyone is welcome to call rick at pacific time or maybe mountian, hes in arizona. More the merry'er!

[biggdawg]

I would be in for 223 and 45 keep us updated

[rocice]

I would be in for 45

[gunoil]

I WILL keep informed and talk to rick once every week or so.



mike@harleykitplane.com

[bakrzdzn]

Hi all, would such a thing work on a Dillon? square deal B? it would sure save a lot of time and fingers in the long run.

[jmorris]

Here is a video of my .224 feeder on a 1050. They will also work on a 550 but you have to seat and crimp on 4. On a 650 or 1050 you lose your powder check or seat and crimp on the same station.

Your out of luck on an SD. Even if there was a feeder that would fit the tool head (and there isn't one) you cannot seat and crimp on 4, like is possible with the 550.

http://i121.photobucket.com/albums/o213/jmorrismetal/th_1050.jpg (http://s121.photobucket.com/albums/o213/jmorrismetal/?action=view&current=1050.mp4)