PDA

View Full Version : Noe 311247gc


45bpcr
12-05-2012, 02:43 PM
As this is my 1st NOE mold I'd like to say "Thanks" to the crew at NOE for a very nice casting mold!
I plan on shooting them out of this old 1953 M-70 in 30-06.
Now,
Could you please add a 4 cavity mold that drops a .460 535 grain Postell and a .410 that drops a "money" bullet like the BACO 409400M4?
Thanks again

45bpcr

55367

55368
55369
wcp4570
12-05-2012, 09:32 PM
45
Your last picture shows the old M70 at the range, I'm curious as to how the NOE 247 shot. I've been thinking of getting one of his 6.5 molds.

wcp
quasi
12-07-2012, 03:29 AM
NOE had a Postell run, I have one but have not used it yet.
Moonie
12-07-2012, 10:43 AM
I shoot the Accurate version of this boolit in my 30-06, it is very accurate and shoots well behind 35gr H4895@1,950fps.
wcp4570
12-07-2012, 12:29 PM
Hey the accurate version is the one to buy. Ha. I've read in other discussions that this boolit will take a gas check, did you use a check at that velocity or was it just good alloy and lube?

wcp
SwedeNelson
12-07-2012, 04:11 PM
Shameless plug -
Have then in stock - can ship today!
5 cavity GC
http://noebulletmolds.com/orders/catalog/product_info.php?cPath=30&products_id=206
5 cavity PB
http://noebulletmolds.com/orders/catalog/product_info.php?cPath=30&products_id=205

Swede Nelson
Moonie
12-08-2012, 10:29 PM
Hey the accurate version is the one to buy. Ha. I've read in other discussions that this boolit will take a gas check, did you use a check at that velocity or was it just good alloy and lube?

wcp

SwedeNelson makes great molds, I just didn't have the time to wait. Yes, my mold is cut for gas checks and I do use them at that velocity. I do not in my 300BO.