175gr cast in 40S&W

[boolit_boy]

Just starting to load for my Norinco NP58 and was wondering what a good powder would be to try. I picked up some Titegroup, and also have some W231.

[Lefty SRH]

Can't say anything about Titegroup BUT 231 or HP-38 is good for the .40 S&W. Personally I like CLAYS in my .40 S&W

[garym1a2]

WST, 3.7 was my old minor USPSA load.
Bullseye is always good, I use 4.2 gr.

[birddog]

Can't go wrong with bullseye or 231, but I also load the majority of mine with claydot. Tidtegroup should do very well also.

[marlin39a]

I'm working on getting my Ruger SR40 to like the Lee 175 TC. Running it sized .401 with White Label 2500 over 4.4 gr HP-38. Cronys around 850-890 fps with slight leading in front rifling. Wish they had a .402 sizer.

[NSP64]

I just got a 40 and a .401 sizer from rcbs. I lapped the sizer to .4025 works great now, 0 leading.

[RobS]

I just got a 40 and a .401 sizer from rcbs. I lapped the sizer to .4025 works great now, 0 leading.

+1, lapping or honing a sizer die is pretty easy to do

[Bwana]

My USPSA load is Lee 175TC, water dropped WW, 3.5gr Titegroup, R-P brass, WSPM primer, 1.10 LOA, .418" crimp at edge of mouth.
This is used in my G23 with factory barrel. No leading.