Anyone using TAC#1 in your Star?

[dbarnhart]

Anyone using RandyRat's TAC#1 in their Star? What temperature and pressure are you using?

[buyobuyo]

I'm using it in my star, but I don't have thermometer for the heater and I run the turn screw for pressure. When the house in warm during the summers, I don't need the heater. In the winter, I run it for a few minutes, then unplug and plug back in as needed. I would guess the temp it runs best for me is 75-80 degrees. I run the pressure screw at 10-15 turns from when it makes contact with the plunger assembly.

[bpratl]

I have been using it in my star with 50 PSI air pressure and the PID set at 105 deg F., which has worked out well for me.

[dbarnhart]

Thank you. That worked for me too.

[PS Paul]

Hi Dave. I used some of that Tac#1 lube from ya and it has worked great in the 450 sizer!
Paul