Blammer
06-18-2007, 03:57 PM
Today I saw it all come together.
The waiting the investigation, the melting, lubing and shooting!
This is a pic of my FIRST 35 cal bullets I made from start to finish.
I got the mould, cast the bullets, lubed, sized, loaded and shot.
It's a RCBS 200 gr GCFP, that cast at 210 gr, I used the GC's I got from 45nut, the black moly lube, sized to .358, loaded in my 35 Rem contender. Below is a target I shot at 25 yards with a 2x scope and rest of course. There was no leading and the barrel was quite clean after each shot. :D
and what you don't see is the (once again) 8 1 gallon jugs of water lined up back to back at 25 yards that I also shot. And yes again, the bullet sailed through all 8 of them...
http://i54.photobucket.com/albums/g81/blammer8mm/Targets/35rem210GCFPmolylube.jpg
The waiting the investigation, the melting, lubing and shooting!
This is a pic of my FIRST 35 cal bullets I made from start to finish.
I got the mould, cast the bullets, lubed, sized, loaded and shot.
It's a RCBS 200 gr GCFP, that cast at 210 gr, I used the GC's I got from 45nut, the black moly lube, sized to .358, loaded in my 35 Rem contender. Below is a target I shot at 25 yards with a 2x scope and rest of course. There was no leading and the barrel was quite clean after each shot. :D
and what you don't see is the (once again) 8 1 gallon jugs of water lined up back to back at 25 yards that I also shot. And yes again, the bullet sailed through all 8 of them...
http://i54.photobucket.com/albums/g81/blammer8mm/Targets/35rem210GCFPmolylube.jpg