View Full Version : Saceo Lubri-sizer / lube pressure assembly
LatheRunner
11-18-2012, 11:35 PM
What kind of lubrication do I need for the rubber seal on the lube pressure assembly.
Will Plumbers Silicone Grease work without contaminating the boolit lube or the gun powder.
JCherry
11-19-2012, 01:15 PM
Latherunner,
I've been using a Saeco Lubri-sizer since about 1986 and never had reason to lube the rubber seal. A bit of bullet lube on it is all you would want to put on it. Just be patient putting it into place.
Have Fun,
JCherry
LatheRunner
11-19-2012, 02:00 PM
Latherunner,
I've been using a Saeco Lubri-sizer since about 1986 and never had reason to lube the rubber seal. A bit of bullet lube on it is all you would want to put on it. Just be patient putting it into place.
Have Fun,
JCherry
Thanks for the advice. It came with what looked like axel grease on the end of the pressure assembly. Bullet lube sounds good to me.
LatheRunner
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.