PDA

View Full Version : Old cast bullets that have been lubed



bulet shotter
11-18-2012, 11:59 AM
I had a friend that gave me over 1000 cast bullets that were lubed probably 20 years ago. This wax looks all dried out,very hard. I was trying to get this wax cleaned out. I have boiled the bullets,worked some,I put some dawn detergent soap in with it to, still does not get it as clean as I wanted,so I could re lube them. Are there any other ideas on how to clean, besides buy hand? Jerry

zomby woof
11-18-2012, 12:31 PM
How about an oven at around 180 degrees?

Bullet Caster
11-18-2012, 04:00 PM
Try using mineral spirits--soak 'em and then wipe 'em off with a rag. That should do the trick. BC

TRguy
11-18-2012, 08:32 PM
How about an oven at around 180 degrees?

My oven has a minimum setting of 200. I wonder if that is standard....I dont know

mdi
11-19-2012, 04:36 PM
200 degrees won't hurt anything.

Elkins45
11-19-2012, 04:49 PM
I'm surprised boiling water wasn't 100% successful. The old lube will usually just float to the top and can be skimmed away once it cools.

A good soak in mineral spirits will probably take care of the rest, then wash them with Dawn again.

Kskybroom
11-19-2012, 05:23 PM
I'm surprised boiling water wasn't 100% successful. The old lube will usually just float to the top and can be skimmed away once it cools.

A good soak in mineral spirits will probably take care of the rest, then wash them with Dawn again.

+1
Boiling in water should do it
ive boiled alot of lube off old boolits
+ reuse the lube