Micrometer Powder Bar

[hiram1]

It is a cool tool.The Micrometer Powder Bar.from unique tek. it works so well on my dillons.It sure speeds up the getting to the same charge of powder in the load book.Or your fav charge of powder.I have one on my 550 and one on the sq deal.

[Baja_Traveler]

Cmon - almost 800 posts and you don't include a link??

Micrometer Powder Bar (http://www.uniquetek.com/site/696296/product/T1231)

[rasto]

This is my next DIY project.
I already bought the micrometeter ;-)

[pastor]

Looks cool but ouch! 59.00 may have to think awhile on that one

[LUBEDUDE]

Cool as all get out....until you try to read them!

I bought and installed two and did not balk at the price. But after installing and using I fiqured that there must be better. If you are over 40 and you reading eyes are starting to go, may I suggest this from ebay instead. It has BIG numbers, easy to read. And for 1/3 the price.

[C.F.Plinker]

Cool as all get out....until you try to read them!

I bought and installed two and did not balk at the price. But after installing and using I fiqured that there must be better. If you are over 40 and you reading eyes are starting to go, may I suggest this from ebay instead. It has BIG numbers, easy to read. And for 1/3 the price.

This post is no good without a link.

[LUBEDUDE]

http://www.ebay.com/sch/i.html?_sacat=0&_from=R40&_nkw=dillon+reloading&_pgn=4&_skc=150&rt=nc

7th item down, and oops, less than one half the price, not one third. Sorry, thought it was $20.

[300winmag]

I found it"
Thanks
http://www.ebay.com/itm/Dillon-Powder-Measure-Adjusting-Bolt-/140883426134?pt=LH_DefaultDomain_0&hash=item20cd4e7b56