Grapeshot
11-10-2012, 11:48 PM
I aquired a Marlin .45/70 1895 Cowboy a couple of years ago. Since I got it I had to replace the ejector and when I took it out today I had the lever jam in the downward position with four rounds in the magazine tube.
I had to Smack the butt on the ground to release the next round in the tube to come out and position itself on the lifter.
What part or parts am I going to have to replace or polish to get it to feed reliabley?
I had to Smack the butt on the ground to release the next round in the tube to come out and position itself on the lifter.
What part or parts am I going to have to replace or polish to get it to feed reliabley?