littlejack
10-30-2012, 01:03 AM
Hey fellas.
I bought a MEC 600 reloader at St. Vinnies a while back. It did not have the priming spring or priming pad.
I made a spring, but still need the pad. This is the thick metal washer that sets on top of the spring, that holds the primer in place.
Now that I have my lathe, I figured I would just turn one for myself.
Can someone post me the dimensions of the piece? I would be much abliged. I need the thickness, the outside diameter, and the inside diameter of the hole for the primer. This is for a 12 guage.
Thank you.
Jack
I bought a MEC 600 reloader at St. Vinnies a while back. It did not have the priming spring or priming pad.
I made a spring, but still need the pad. This is the thick metal washer that sets on top of the spring, that holds the primer in place.
Now that I have my lathe, I figured I would just turn one for myself.
Can someone post me the dimensions of the piece? I would be much abliged. I need the thickness, the outside diameter, and the inside diameter of the hole for the primer. This is for a 12 guage.
Thank you.
Jack