Interchangable handles???

[glenkans]

I've got lyman and rcbs handles for double moulds and thought I'd never need more production than what a double mould could give.Well,,,, that's changed and now I'm looking at a saeco 4 cav. mould for a .32..(The thing's so much fun to shoot)Will my double handles work with the 4 holer?Off hand,I'm guessing not.Hope you guys aren't all sleeping so's I get an answer.Best wishes,Glen

[JonB_in_Glencoe]

I would say not.
But it's easy to modify a set of Lee 6 cav. handles to work with Saeco 4 cav. molds.
Jon

[375RUGER]

probably not. there is a sticky somewhere about which moulds and mould handles are interchangeable.

[BCall]

I don't think the handles you have will work without modification, but the cheap simple solution is to use a set of Lee's as JonB mentioned. This is a Saeco 4 holer #325 mounted on a set of Lee handles. All I had to do is open up the mounting holes a little with a slightly larger drill bit and they worked perfectly, no other modification needed. YMMV
http://i258.photobucket.com/albums/hh259/blcall/SN851214.jpg