PDA

View Full Version : 7x57mm



tbierley
10-13-2012, 10:03 PM
I need a recipe for a Remington Rolling Block Model 5 in 7mm with 139gr Lee cast bullets. I was thinking about 14grs of 2400 but was worried about pressures. Need a good recipe.

Ben
10-14-2012, 03:11 PM
tbierley

I've shot 17.3 grs.of 2400 in my Ruger Hawkeye 7 X 57 with a heavier bullet than that with zero problems.

http://img.photobucket.com/albums/v494/haysb/7%20X%2057%20Synthetic%20Stock/0011280x768.jpg

http://img.photobucket.com/albums/v494/haysb/7%20X%2057%20Synthetic%20Stock/004800x600.jpg

No pressure signs at all. I'd think that 14 grs. would be pretty mild with a 139 gr.

If the necks are sooted, you may need to " inch up " a grain or so at a time on the powder charge until the necks are clean.

Ben

Lefty SRH
10-14-2012, 04:47 PM
Boy I like that rifle!