lee pro 4 20 melter

[ericshupperd]

Does anyone know if the valve arm on the lee pro 4 20 melter can be attached to the left side for left handed users. Casting bullets cross armed isn't very comfortable and is not a smooth operation. Also can the mold guide be mounted on the right side to go along with moving the valve arm.:killingpc

[Frozone]

No. The support rod that has the mold rest on it would be in the way.

[Mk42gunner]

I'll try to dig out my old 4-20 tomorrow and take a look. You might be able to disassemble the whole thing and put it back together like you want, but no guarantees.

Robert

[km101]

It would require disassembly of the pot, and then the front support would bee too close I think. Probably not a good idea.