Who tumble lubes their 10mm hunting bullets?

[21Glock]

I have been tumble lubing for the last few years using LEE molds with LLA for my .45 ACP Glock and just recently got a Gen 4 Glock 20 10mm that I will use for deer hunting.
I know I will using faster loads in this 10mm for hunting this Fall. I have a new Lee 175gr.. 40/10mm Truncated Cone mold coming in from Midway.
I'll be getting a Lubricator/Sizer(RCBSor Lyman in the near future.

I was just curious if any of you tumble lube your heavy cast 10mm bullets for deer hunting and how is it working out in the leading dept.?

Thanks!

[ctious]

I am. Just do it 3 times. I found u need a lil more on it than normal to get no.leading.

[Chris]

I have done it in the past and stopped because I push mine too fast. No matter what I get leading.

[ctious]

I have done it in the past and stopped because I push mine too fast. No matter what I get leading.

Mine are going around the 1500 fps mark in my 10 mm long slide. With 3 coats no leading.