View Full Version : Gas checks shaving
Finarfin
09-20-2012, 12:11 PM
I am using a Lee push through sizer and when I size my bullets it shaves off some of the copper from the gas check. Does this affect accuracy, or can I just ignore it? They are tiny hairlike shavings. Otherwise it is working pretty good.
geargnasher
09-20-2012, 01:26 PM
Take a tapered punch and some wet/dry sandpaper (about 320grit) and some oil and "break" the sharp edge on the entrance of the sizer hole.
Gear
shotman
09-20-2012, 05:39 PM
gear is right
lees good Idea again
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.