View Full Version : Interchangeable sizing dies ?
xring1
08-29-2012, 02:06 PM
Are there any other manufacturers sizing dies that can be used with a Saeco resizer ?
theperfessor
08-29-2012, 03:20 PM
I don't think there is another commercial source, there are folks here that make them on a one-of basis. Maybe check Buckshot?
VHoward
08-29-2012, 09:05 PM
I believe Lathesmith can also make you a die for your Saeco.
1874Sharps
08-29-2012, 09:53 PM
I am pretty sure RCBS and Lyman, which are interchangeable, are not compatible with Saeco. Saeco has its own system and design, which I suppose is unique so that presumably you will buy only their gear. However, as the folks above suggest, I will bet you could get some of the machinist types here to help you out and make one for you. The capabilities of the do-it-yourself crowd on this forum are quite impressive and diverse.
bobthenailer
08-30-2012, 07:34 AM
No they are not interchanble with any other brand sizer die , they are threaded on the bottom of the die to accept a locking nut . See Lathsmith
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.