walker nipple

[flounderman]

I am rebuilding an old walker colt replica made by replica arms, marrieta ohio. I need a nipple for it. does anyone know the thread size or nipple number for this. I also need a mainspring and whatever holds the loading lever to the barrel.

[Tatume]

If it was me, I would call the folks at Track of the Wolf (763-633-2500) and ask them

[Fly]

Yea Track of the wolf has them all.Just look on the net.There web site has nipples.
If those folks don't have it, then you have a bunch of hard digging to do.Great company.

No I don't work for them. Fly

[Tatume]

Their web site has nipples, but I looked at all four pages and didn't see Replica Arms. There are several different threads for Colt revolver nipples. That's why I suggested calling.

[Beagle333]

Deer Creek Waldron Indiana - 765-525-6181

Winchester Sutler - Winchester, VA - 540 888-3595

[Hellgate]

Replica Arms imported Uberti guns. Look on the gun for Uberti's manufacture symbol which is the outline of an octagonal barrel muzzle with a "U" inside the octagon. Whatever nipple fits the Uberti Walker ought to work for yours. ASM also made Walkers but I don't believe thay were ever imported by Replica Arms. Armi San Marco guns have ASM or SM stamped somewhere on the frame or barrel. My ASM guns and my Uberti guns have the same thread pitch for their nipples but I don't know for sure if ASM Walkers are the same as Uberti Walkers for nipple threads.

[StrawHat]

Replica Arms also imported some ASM stuff. I have a Replica Arms 2nd Dragoon, no makers marks on it anywhere.

The odds are your Walker is an ASM if no makers marks can be found.