410 reloading

[NSP64]

Anyone reload for their 410?
If so how are you doing it?

[500Smith]

I use a MEC 600 jr single stage press.

1/2 oz #9 shot, 15.8 gr H110, WAA410HS wad, WW209 Primer. I reload the WW HS Hulls. Use this for Skeet. Switch to #8 for Trap on occasion.

I usually add a few extra pellets before I do the final crimp.

Sorry if you’re looking for making slugs or shot I can’t help.

Jay

[krag35]

Remington black hulls (2 1/2")
Win 209 primer
Remington SP410 wad
1/2 oz #7 1/2
15 gr H-110
I use a generic "whack it" loader I bought off of E Bay.
does what I want it to do.

[shotman]

mec 600 is best and get the adjustable bar.
OH both on feebay now
if you are going to load for a long time go to the sizemaster

[9.3X62AL]

Another MEC 600 Jr. user here for the 410.

W-W 3" red hulls
11/16 oz #9 shot
WWAA41 wad
CCI 209 primer
14.5 grains of 2400

Deadly on doves and quail to 35 yards. Hulls last 8-10 refills.

[steg]

I've been having good luck with a roll crimper, plus I had a buddy open up an old sizing die to reform the brass. with this set-up your GTG with shot, buckshot, or slugs. Not necessary to change anything but components between 2 1/2" and 3". No problem feeding them through my Mossberg pump. The only shellholder that the .410 would fit to resize them in my RCBS is the 303 British..........