Cast Bullet Suggestion for 7.5 Swiss Revolver Round

[Cactus]

Hi guys,

Trying to help a friend out looking for a cast boolet suggestion and loading data for the 7.5 swiss revolver round? He has found data but is unsure, does anyone cast and reload for this round?

Thanks
Cactus

[rintinglen]

Ck Barnes "Cartridges of the World" of for load data. It may be a little difficult finding a 110 grain .318 mold, though. One of the 316-316 NOE molds might be your best bet, if the Swede has any left. Used as cast, it should be ok, even if a smidge undersized. 32 S&W Long data for the 311-008 could be used, but that boolit would be undersized. If you could find one, a Lyman 319-50 would be the berries, slightly more common but a tad over-sized would be the 323-59. The RCBS 8MM Nambu Mold might also do the trick. Good luck.