View Full Version : Anyone got a little strip of flashing they'd sell me/swap me/donate me?
I have Pat Marlin's checkmaker but no local store stocks the .015" Amerimax or any other flashing other than super thin .007" stuff. Before I order online, I'd like a small sample- enough to make perhaps 100 checks.
I'd happily donate/trade/pay it forward/buy whatever for these.
Let me know i fyou have some.
Thanks,
Jon
Idaho Sharpshooter
07-16-2012, 04:39 PM
Would lithograph aluminum help? I looked for some out in the shop, and could not locate my stash. Soooooooo, I drove over half a mile to the Newspaper and got about a dozen sheets.
It mikes .008.
If that will work, let me know and I will cut you half a dozen 9x12 inch pieces and mail them to you.
Rich
.30/30 Guy
07-16-2012, 05:00 PM
I have some of the Ace Hardware .014" Amerimax stuff. Also have some dead soft .016" x .500" coil stuff that I use for 30 calibers.
PM me if you are interested.
The .008 is a bit thin; however the .014 or .016 would be fine- 30/30 guy, PM inbound.
Idaho Sharpshooter
07-16-2012, 11:36 PM
double the .008" and all is well.
Looks like the dirty-thirty guy has you covered.
Rich
MUSTANG
07-21-2012, 06:12 PM
I have Pat Marlin's checkmaker but no local store stocks the .015" Amerimax or any other flashing other than super thin .007" stuff. Before I order online, I'd like a small sample- enough to make perhaps 100 checks.
I'd happily donate/trade/pay it forward/buy whatever for these.
Let me know i fyou have some.
Thanks,
Jon
Jon:
Did you get the 0.14 Aluminum Flashing strips you needed? If not drop me a PM with your address ad I'll send you some.
Mustang
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.