Alliant AR Comp

[connecticut-yankee]

Has anyone used AR COMP for 223 / 556 loads?? I went to pick up 335 and the guy told me to get AR COMP.

Any comments would be appreciated.

[runfiverun]

for jaxketed i assume.
auto-comp i dunno about but have heard good about the cfe stuff

[blaser.306]

The copper fouling eraser sounds very much akin to the same tech. as Ramshot Tac ! It also is supposed to erase the copper from your bore!!! I have been shooting it in my 6.5 tcu with 140 gr. cast boolits out to 200 yds and seems to work real well! I may have to try some of the cfe in 7mm tcu as well as 30 Herrett .

[popper]

I use in AR-308, it's fine but costs more. Supposed to be temp insensitive. I couldn't tell the diff between it and varget. It's imported.

[MtGun44]

TAC has had it along with (IIRC) RL 15 for quite a while. Apparently quite
good at keeping bbls free of copper build up. Should be particularly applicable
(besides the military it was originally developed for) to varmint hunters who are
shooting large quantities of jbullets in a day and need to retain best accy over
the day.

For Pb shooters, probably no big deal.

Bill