tomme boy
07-11-2012, 02:16 PM
I went back out this AM to re-test a couple of loads I shot yesterday. I wanted to see if they shot today the same as yesterday. One proved really good.
http://img.photobucket.com/albums/v21/tommeboy/101_0013.jpg
The two out side ones were with Win cases. All the others were Federal. I loaded up a couple of the Win to see if mixed cases would make a difference. I was having problems with other loads with mixed brass. So I am going to separate them all.
This was loaded with a 200gr SIL from RCBS sized to 0.311" an lubed with Randyrats Tac1 lube with Hornady checks an 22gr of 5477.
Here is the set up and the private range we shoot at.
http://img.photobucket.com/albums/v21/tommeboy/101_0010.jpg
http://img.photobucket.com/albums/v21/tommeboy/101_0012.jpg
Here is the steel at 300yds.
http://img.photobucket.com/albums/v21/tommeboy/101_0014.jpg
Here is the 400 yard steel
http://img.photobucket.com/albums/v21/tommeboy/101_0015.jpg
http://img.photobucket.com/albums/v21/tommeboy/101_0013.jpg
The two out side ones were with Win cases. All the others were Federal. I loaded up a couple of the Win to see if mixed cases would make a difference. I was having problems with other loads with mixed brass. So I am going to separate them all.
This was loaded with a 200gr SIL from RCBS sized to 0.311" an lubed with Randyrats Tac1 lube with Hornady checks an 22gr of 5477.
Here is the set up and the private range we shoot at.
http://img.photobucket.com/albums/v21/tommeboy/101_0010.jpg
http://img.photobucket.com/albums/v21/tommeboy/101_0012.jpg
Here is the steel at 300yds.
http://img.photobucket.com/albums/v21/tommeboy/101_0014.jpg
Here is the 400 yard steel
http://img.photobucket.com/albums/v21/tommeboy/101_0015.jpg