w30wcf
07-06-2012, 09:35 AM
I'm trying to determine the diameter and depth of the hollow point.
The illustration below from the early Ideal catalogs, shows a pretty large and deep opening which, I think, is not correct(?).
The cataloged bullet weight was 195 grs. vs 210 grs of the parent bullet (42498 which is now known as the 427098).
If you do have this mold, I would appreciate knowing the upper pin & lower pin diameters and the pin depth.
http://i116.photobucket.com/albums/o25/w30wcf/Collector%20Cartridges/42498424991.jpg
Thank you,
w30wcf
The illustration below from the early Ideal catalogs, shows a pretty large and deep opening which, I think, is not correct(?).
The cataloged bullet weight was 195 grs. vs 210 grs of the parent bullet (42498 which is now known as the 427098).
If you do have this mold, I would appreciate knowing the upper pin & lower pin diameters and the pin depth.
http://i116.photobucket.com/albums/o25/w30wcf/Collector%20Cartridges/42498424991.jpg
Thank you,
w30wcf